NFC
Use NFC to send data: Open
Settings, then touch Device connectivity and enable NFC and
Huawei Beam. Select the files to be sent and touch Share > Huawei Beam. Keep your Phone
unlocked and the screen on. Place the NFC detection areas of both devices close together. Once a
connection is established, the transmitting device will play an audio prompt and the sharing screen
will minimise. Touch the transmitting device's screen to begin sending files.
Receive files over NFC: Open
Settings, then touch Device connectivity and enable NFC and
Huawei Beam. Keep your Phone unlocked and the screen on. Place the NFC detection areas of both
devices close together. Once a connection is established, the transmitting device will play an audio
prompt. After the prompt, please wait for the file transfer to complete. Received files are saved by
default to the Beam folder of your Files.
l
If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is
enabled. Features may vary depending on your network provider.
l
Not all devices support NFC.
Transfer Data between Your Phone and Computer
Use a USB cable to connect your Phone to your computer and transfer data.
Select USB connection mode
Device Connection
25