New Device
New Device Configuration
Connecting to the Internet
Connect to Wi-Fi networks effortlessly with your device.
Connecting to a Wi-Fi network
1
Swipe down from the status bar to open the notification panel.
2
Touch and hold
to open the Wi-Fi settings screen.
3
Switch on Wi-Fi. Your device will list all available Wi-Fi networks at your location.
4
Select the Wi-Fi network you want to connect to. If you select an encrypted network, you
will also need to enter the Wi-Fi password.
Connecting using mobile data
Before using mobile data, ensure that you have a data plan with your network provider
to avoid incurring excessive data charges.
1
Swipe down from the status bar to open the notification panel.
2
Touch
to enable mobile data.
To save battery power and reduce data usage, disable your mobile data connection
when you don't need it.
Enrol a Fingerprint
You can enrol a fingerprint on your device and then use your fingerprint to unlock your
screen and access your Safe or App lock without a password.
•
When your device restarts or your fingerprint is not recognised, you will need to use
your lock screen password to unlock.
•
Before enrolling a fingerprint, make sure your finger is clean and dry.
1
Open
Settings.
2
Go to Security & privacy > Fingerprint ID and follow the instructions to set or enter the
lock screen password.
3
Go to New fingerprint to enrol your fingerprint.
4
Place your fingertip on the fingerprint sensor and hold until your device vibrates. Repeat
this step using different parts of your fingertip.
5
After enrolment is complete, touch OK.
To unlock the screen, simply place your finger on the fingerprint sensor.
7