Getting started
Powering on, powering off, and restarting
Powering on the band
•
Press and hold the button to power on the band.
•
The band will power on automatically when you connect it to a charger.
You will be prompted with a message asking you to charge your band when the battery is
critically low. The band will power off automatically after 2 seconds and you won't be able to
power it back on again without the charger.
Powering off the band
•
On your band, go to
Settings
>
System
>
Power off
.
•
Press and hold the button for 3 seconds, then touch
Power off
.
Your band will automatically power off if it has run out of battery.
Restarting your band
•
On your band, go to
Settings
>
System
>
Restart
.
•
Press and hold the button for 3 seconds, then touch
Restart
.
Pairing and connecting
The band is ready for Bluetooth pairing by default when it is powered on.
•
Your band can only be paired with phones running Android 5.0 or later, or iOS 9.0 or later.
Make sure you have enabled Bluetooth on your phone before starting pairing. Make sure
to enable Location Services if you are connecting your band to a phone running Android
6.0 or later.
•
When you turn on your band for the first time or pair it with your phone after a factory
reset, you will be prompted to select a language before continuing. After the devices are
paired, the language on your band will sync to your phone's language.
1
