_________________________________________________________________________________________________
________________________________________________________________________________________
14/15
U326_UVAintAS102_B_e_210316
17
Returns
When returning sensors, these should be cleaned thoroughly according to the instructions. A hazard warn-
ing or declaration of no objection must be supplied for substances which have been in contact with the
sensor or possibly infiltrated the cavities in the sensor. If adhesion of hazardous substances cannot be
ruled out, then detailed safety measures to be taken when handling the equipment must be itemised.
18
Disposal
The customer should assume the duty to dispose of the equipment at his own expense and according to
statutory provisions (e.g. ElektroG in Germany).
19
Replacement Parts
1
1
2
Fig. 3: Fuse TR5
Fuse TR5 (2) is situated in the base behind the power
supply connecting terminals and is easily accessible
by loosening the screws (1) to remove the cover
plate:
for 230 V AC TR5-T 100 mA order no. e025/023
for 24 V DC TR5-T 500 mA order no. e025/024
for 12 V DC TR5-T 500 mA order no. e025/024
Always switch off before changing the fuse!
