S
OUNDTRACK
Audio DSP24
- 47 -
•
Go back to
General
and select
Wave Profiler
. Follow the directions on screen until you see
the message
Audio hardware has been successfully profiled
.
•
Select
ADSP24 Ext.(n) WaveOut 1,2
as
Playback Timing Master
and ADSP24 Ext, (n)
Input
1,2
as
Record Timing Master
. If you are recording from the S/PDIF input, select
ADSP24
S/PDIF In (n)
instead. The option
Audio Driver Bit Depth
should be set to
24
.
•
Select the sample rate and resolution you want to use under
Default Settings for New Projects
.
•
Mixing Latency
: Basically, you can set
Buffers in Playback Queue
as
4
. Settings less than
4
will result in lower latency but the system performance could be lower, resulting in possible
drop-outs. Start with buffer sizes suggested by
the Effective latency
tests, usually around
100msec. When the latency needs to be under 100msec, click on the
Advanced
tab and enable
the
WavePipe(TM) Acceleration
option. Please note that each system will have different
optimal settings. You should experiement with the settings to get the perfect setup for your
system.
•
Under
Device Profiles
, enable the option
Use Wave Out Position For Timing
.
You can get the latest updates and informations on Cakewalk on http://www.cakewalk.com.
