background image

11

Genuine HOOVER Spares

Tel. 01204 556 111

www.hooverspares.com

Always replace parts with genuine Hoover spares. When ordering parts always 

quote your model number.

Hoover Customer Helpline

Should any faults occur with your cleaner during the first 12 months 
contact the Hoover Customer Helpline on the number below.

Tel: 08705 400 600
Fax: 01204 556149
Email: customer.service@hoovercandy.com

Hoover have a computerised nationwide service network of over 500 engineers 
who will quickly respond to your call and guarantee your repair for 12 months. 

GUARANTEE STATEMENT

The guarantee conditions for this appliance are as defined by our representative in 
the country in which it is sold. Details regarding these conditions can be obtained 
from the dealer from whom the appliance was purchased. The bill of sale or recipt 
must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

Environment - WEEE Directive

This appliance is marked according to the European Directive  2002/96/EC on Waste 

Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly you will help prevent potential 

negative consequences for the environment and human health, which could otherwise 

be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as houshold 

waste. Instead it shall be handed over to the appliance collection point for recycling of 

electrical and electronic equipment.

Disposal must be carried out in accordance with the local environmental regulations 

for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, 

please contact your local city office, your household waste disposal service or the 

shop where you purchased the product. 

Quality

BSI ISO 9001

 Hoover’s factories have been independently assessed for quality . Our products are   

 made using a quality system which meets the requirements of ISO 9001

Quality and the Environment

As the owner of a new Hoover product we would like to tell you more about the high 
standards we have set in Quality and the Environment

USE ONLY HOOVER SPARES

SPARE PARTS

CODE

HEPA FILTER AND FOAM

U48- 35600834

EXHAUST FILTER

T95- 35600835

AGITATOR

Y22-35600837

BELT

V30-35600838

HOSE

D102-35600836

PET HAIR TURBO BRUSH

J34-35600840

ALLERGEN REMOVER BRUSH

J33-35600839

Freedom IM.indd   11

01/06/2008   07:54:40

Summary of Contents for 39100173














Reviews: