Control panel and indicator lights
Programme Selector
– Select the required programme
‘Marche Arrêt’ button and indicator
– Press to switch on, the indicator will light
‘Départ Différé’ button
– Allows the user to delay the start of the drying cycle (see
details of operation page 16)
‘Départ Pause’
– Press ‘Départ Pause’ to commence the selected drying programme
‘Choix Textile’ button
– Press to reduce the heat level for delicate items, the indicator
above the button will light up. To change the heat setting the programme must be reset
Low Heat – Indicator light
ON
High Heat – Indicator light
OFF
‘Réservoir Plein’ indicator
– lights when the water container is full
‘Entretien Filtre’ indicator
– lights when the filter needs cleaning
Display
START
– When the dryer is switched on the START indicator will flash, when the
programme starts the START indicator will light up
60'
– Indicator lights when there is less than 60 minutes left until completion of the
programme
15'
– Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP
– Indicator lights when the programme is finished.
6h
– 6 hour start delay (light flashes when in operation)
9h
– 9 hour start delay (light flashes when in operation)
11
Controls and indicators
ACRYLICS/
SYNTHETICS
BUTTON
(Choix Textile)
ON/OFF
BUTTON
(Marche
Arrêt)
FILTER CARE INDICATOR
(Entretien Filtre)
EMPTY WATER
INDICATOR
(Réservoir Plein)
PROGRAMME
SELECTOR
START PAUSE
BUTTON
(Départ
Pause)
START DELAY
BUTTON
(Départ
Différé)
COUNTDOWN
DISPLAY
40005241Eng.qxd 05/09/2007 14:08 Page 11
