- 12 -
Operation
Before Use
This refrigerating appliance is not intended to be used as a built-in appliance.
Remove
all
of
the
packaging
,
including
the
foam
backing
at
the
bottom
of the
unit
and
the
tape
that
fixes
the
shelves
and
door
bins
inside
.
Place
the
refrigerator
to
a
proper
position
,
and
adjust
the
feet
to
level
.
It
is recommended
to
wipe
out
your
unit
with
a
warm
soapy
cloth
and
dry
it thoroughly
before
use
.
Place
the
refrigerator
and
adjust
to
level
,
clean
it
,
let
the
refrigerator
stand for
above
4
-
6
hours
,
and
then
power
the
unit
on
.
This
helps
make
sure
that the
oil
from
the
compressor
has
settled
properly
,
and
will
help
your
unit
run normally
.
- 12 -
Instructions
for
child
lock
lever
Press the child's lock lever with your thumb as the direction as below
①
and the water lever
will be locked and effectively reduced the
water took by children.
Press in the opposite direction to unlock and take water
②
①
②
Fill the tank with pure drink water( )
*
1
MAX
2L
Open the inlet cover of water tank
①.
Slowly fill the tank with pure
drinking
water up to the maximum fill line marked with “2L”. Then
close the inlet cover
①
. To prevent any spills, please use a
narrow-bore container to charge
water.
* Only direct drinking water or mineral water can be stored in the
water tank
