APPLIANCE CONTROLS -
H
PWD 290
Turning on the appliance
To turn the appliance on press the selector button.
The ON indicator light flashes when the appliance is on and the drawer is open. It will stop flashing and remain
on steady when the drawer is closed.
The appliance will start heating only if the drawer is closed properly.
Temperature selection
The temperature can be set between 30°C and 70°C.
To set the temperature, just press the selector button.
Each time you press, the temperature is changed (from 1 to 6 and then the maximum).
Note: the indicator light for the set level is visible only with the drawer open.
When the drawer is closed, you can nonetheless see the in-operation indicator light through a small lens on the
front panel.
1
2
3
4
5
1. Level of heating (from 1 to 6)
2. Indicator light ON
3. Heating level MAX
4. Selector / Power on and off
5. Lens
