4 -
The operational setting up of household appliances in their environment
is a delicate operation that, if not done correctly, can have serious
consequences for consumer safety.
Therefore, this work must be entrusted to a professional who can carry
it out in compliance with the technical standards in force.
However, if despite this recommendation, the consumer carries out
the installation themself, HOOVER will not accept any responsibility in
case of technical failure of the product whether or not it causes
damage to goods and/or persons.
INSTALLATION – IMPORTANT NOTICE
The unit or support for the hob, as well as the walls of any adjacent units, must be made
of high temperature resisting material. In addition, the laminate covering the unit or
support should be laid using heat-resistant adhesive to prevent it coming away.
Installation:
• A seal is supplied with the hob. To install it,
. turn over the hob, glass side down, taking care to protect the glass.
. place the seal all round the hob.
. make sure it is placed correctly to prevent any ingress in the support unit.
INSTALLATION – FITTING
Hob casing
Hob with glass side down
Hob glass
or frame
Seal
