Maintaining performance
Using your cleaner
Using your cleaner
EMPTYING THE DUST CONTAINER
For peak performance we recommend the dust container is emptied on a regular basis.
Filling must not exceed the maximum level indicated on the dust level viewing window.
REMEMBER – Always switch off and unplug the machine from the electricity supply
before maintaining your cleaner.
12
Dust container release
Holding the pre-motor filter cover, press the dust container release button and lift the dust
container from the cleaner.
13
Dust container emptying
The 2-stage opening system minimises the escape of dust when emptying. To release fine dust
first, firmly hold the dust container and push down the hand grip at the back of the container
with your palm (13a).
Rotate hand grip with your fingers to open fully the dust container and release the remaining
debris (13b). Reverse operation to close the dust container.
7
FLOOR CLEANING
Make sure handle is fully clicked into place.
1
Self adjusting head
Is ideal to clean carpeted areas.
2
Release power cord
Rotate the quick release cord storage hook to release the cord.
Plug the cleaner into a power socket.
3
Power cord location
For safe operation always ensure cord is located into the 2 cord retaining clips.
4
Working mode
Place foot on cleaner base and pull the handle back to put the cleaner in working mode.
5
Switching your cleaner on
Press the on/off switch as shown.
6
USING THE CLEANING TOOLS
8
Tools mode
Press the stair cleaning release button and lift the handle from the cleaner body.
There are 3 cleaning tools included:
9
Zoom Cleaning Tool with integrated crevice tool
The Zoom Cleaning Tool can be extended for extra reach by pushing the collar
and the handle away from each other. To retract the Zoom Cleaning Tool pull
the collar towards the handle.
10 Pet Hair Remover
The turbo nozzle is stored on the hose support and fits on the crevice tool.
It is ideal for upholstery, stair cleaning and many other uses.
11
Dusting brush
The dusting brush is stored on the cleaner body and fits on the crevice tool.
It is ideal for gentle dusting on all surfaces.
REMEMBER - Make sure handle is fully clicked into place after use.
STAIR CLEANING
REMEMBER – Always work with the cleaner below you. The exceptional suction may
cause the cleaning tool to become locked to a surface, restricting airflow. In such cases,
simply lift the tool away from the surface. Make sure the handle is fully clicked into place
after use.
6
Stair cleaning mode
To use the cleaning tools, press the stair cleaning release button and lift the handle from
the cleaner body.
Release the flexible hose from clips.
The flexible hose fitted with the extended Zoom Cleaning Tool with integrated crevice tool
will reach up a full flight of 13 stairs.
7
Positioning the cleaner for maximum safety
Your cleaner incorporates an Anti-Tip Design. Ensure the cleaner is positioned up against
the bottom step.
www.hoover.co.uk
www.hoover.co.uk
1
2
3
4
5
11
6
7
www.hoover.co.uk
8
9a
9b
10
12
13a
13b
