9
10
MAINTENANCE
MAINTENANCE
Cleaning the terminals
Cleaning blockages
Using a dry cloth or soft dusting brush, remove
any dust or debris from terminals on main body
and handheld.
Press the handheld
release button.
Lift to remove the
handheld from
the main body.
Place foot on the floor
head and pull the
handle backwards to
recline the main body.
Lift the main body off
the floor with the floor
head unlocked.
Use a blunt instrument to clear any blockage
in the hose connecting to the floorhead.
CAUTION:
For best performance all terminals must be free from dust and dirt.
CAUTION:
Use a blunt instrument such as a broom handle or something similar when removing
a blockage from the main body or floorhead.
Replacing and cleaning a blockage from the brushbar
CAUTION:
If the brushbar has been obstructed, the Motor Protection Sensor may have
been activated. Remove the handheld from the main body and clear any obstruction from
the brushbar. Wait 30 minutes for the vacuum cleaner to reset itself. Return the handheld
to the main body and retry.
Using a pair of scissors
remove any threads or
hair caught around
the brushbar.
To release the brushbar
pull and lift the release
lock located underneath
the floorhead.
Remove the brushbar
lifting the side of the
brushbar nearest the
release lock first.
Replace the brushbar.
Fit the inverted round
end of the brushbar
first, then line up and
push the other side
of brushbar into the
floorhead. Refit the
release lock.
