8.
Maintenance
WARNING! Ensure the cleaner is not connected to the mains powers supply
when performing any maintenance duties.
Emptying the dust canister
1. To empty the dust canister, press dust canister release
button on the dust canister handle and lift up.
2. Take the dust canister out of the machine and hold the
dust canister over the rubbish bin, push the release
button to open the bottom of the dust canister, and the
dirt and dust will fall into the bin.
3. Close the dust canister and place back into the machine
it will click into place and you can start to vacuum again.
Cleaning or changing the HEPA filter
1. Press the canister release button to remove the canister from the
machine.
2. Unlock the the canister lid by pushing the lock up and out.
3. Take out the HEPA Filter and rinse under lukewarm water.
4. Let it air dry for 24 hours and assembly again once it is
completely dry.
DO NOT
dry using hair dryer.
NOTE:
Any moisture in the filter can cause damage to the motor.
