CHANGING BAG AND FILTERS
The cleaner should be switched off and disconnected from the mains
supply.
Never operate without filters as damage to cleaner could occur.
1. Open dust bag housing cover and
lift up bag holder and remove bag.
2. Bag removed allowing easy access
to motor filter.
4. To gain access to HEPA filter lift
rear filter cover. This will enable
you to remove HEPA filter.
3. Remove the motor filter by pulling
away from the frame. Fit new
filter by pressing back into frame.
5. Lift HEPA filter out and brush dust
off. Replace if necessary.
6. Showing motor filter and HEPA
filter. Fitting is a reversal of above.
7