10
Use of instruments
Measurement considerations
To avoid electric shocks and short
circuits, the following procedures
must be followed:
Please do not wet this instrument or
measure with wet hands. Otherwise,
it will lead to electric shock accident.
Do not modify, disassemble or repair.
Otherwise, it will cause fire, electric
shock accident or personnel injury.
To avoid electric shock, do not
disassemble the instrument electronic
enclosure. There are high pressure
and high temperature parts inside the
instrument during operation.
Do not place the instrument on an
unstable or slanted surface. It may
drop or fall, causing injury or
instrument failure.
To avoid corrosion or damage to the
instrument due to battery leakage,
remove the batteries from the
instrument if it is to be kept in storage
for an extended period.
Be sure to turn the power off after
using it.
