b) Initial starting up :
Before the first use, it is important to remove, by using detergent, the anti-rust coating applied to the griddle in
the factory.
Connecting the equipment :
-
Make sure that the voltage and frequency of the electrical system comply with the values indicated on
the nameplate.
-
Always check that the electric power supply cable and plug are free of damage.
-
Remove the flange to pay out the entire length of the cord and feed it through the square hole then close
it before inserting the plug into the socket.
-
Connect the electric power supply cable to a socket with an earthed protection wire.
-
The display is now connected.
NB: To connect the display to a socket without any earth protection wire, or to connect directly to the electrical
system, have a qualified electrician make the connection.
c) Use of the equipment :
Elements on the front board
Function
Commutator
On/Off
Thermostat Adjusts
temperature
Green pilot light
Appliance is working (pilot light on)
Appliance off (pilot light off)
Orange pilot light
Appliance in heating process (pilot light on)
Warm griddle plate (pilot light off)
Starting
1/ Switch on the On/Off switch.
2/ Turn the thermostat on the desired position.
3/ Once the orange thermostatic pilot light is switched off, the griddle plate is ready.
Stopping the equipment
-
Turn the thermostat to 0
-
Set the switches to 0: the appliance is turned off entirely
-
Remove the electric power supply cable
-
Let the appliance cool down.
-
Clean the equipment. (cf. 6 Cleaning)
-
Lay some grease on the plate
d) Failure / Repair :
In case of failure or if a part is damaged, please call your after sales service and have qualified personnel deal
with any technical operations.
VI. CLEANING AND MAINTENANCE
-
Remove the connector
-
Clean the appliance regularly each time you use it.
-
For cleaning, use only mild non-abrasive maintenance products for stainless steel, soapy water or
dishwashing liquid with a non-abrasive sponge.
-
Wipe the appliance with a damp cloth.
-
Dry the appliance with a soft clean cloth.
-
Never clean the appliance with a jet of water because leaks could cause irreparable damage to it.
-
Never immerse the appliance, the cord or plug in water or any other liquid, to avoid electric shocks.
