8. Leakage testing
8 2 Leakage testing process
Step 1:
First connect the lateral ends of the tree ways port to the two
h t ili
t b
Th
li k th t b
h
th
i th
l
(bi
8.2. Leakage testing process
short silicon tubes. Then link the tube where there is the clamp (bigger
diameter) to the three way port.
Step 2:
Connect the other side of the clamp tube with the air pressure
bulb. Ensure all the connections are tight.
Step 3:
Connect a free ends of one of the lateral tubes to the
p
manometer after having unscrewed the small bolt on its base and
having passed it around the tube. After that screw the bolt on the
manometer basis.
EDUSTAK
JUNIOR
User
Manual
rev.1.1
©2013
Horizon
Ltd.
All
rights
reserved.
24
