Laying the fire
– 700 Ceramic Log
2. LOCATE L O G N O. 1 :
This is the largest log that is positioned at the
rear of the grate.Two locating pins are positioned
at the rear of the burner. The large log has two
holes on the underside to position in place
1 . L O C AT E 4 C E R A M I C COALS:
Four ceramic coals are supplied with the
burner base. These coals must be laid in the
position indicated on the drawing with the taller
coals on the ends and smaller coals in-between.
3 . LOC ATE LOG
NO’S 2 & 3:
Two front log no
’s. 2 and 3 are supplied to fit into the space
between the metal frame and the ceramic base. These logs
do not cover the front burner ports but are designed to deflect
the front flame back into the fire.
L O G S
P O S I T I O N I N G OF
A L L L O G S
• It is important to follow the log
recommended positioning.
• Not doing so can adversely effect the
operation of the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance
Installation Instructions Kemlan Power Flue Horizon Gas Fireplaces
28/02/2019
Ver. 25
21