INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP 3
BOLT (C)
CONSOLE MAST
CONSOLE
CONSOLE WIRES
BOLT (C)
50 mm
Qty: 2
HARDWARE BAG 3 CONTENTS :
ASSEMBLY
STEP
HAND RAIL
BASE FRAME
BOLTS (A)
GRIP PULSE
HAND RAILS
BOLT (A)
15 mm
Qty: 4
HARDWARE BAG CONTENTS :
A
Open
HARDWARE BAG 1
.
B
Connect
CONSOLE WIRES
.
C
Attach
CONSOLE MASTS
to
BASE
FRAME
using 6
BOLTS (A)
.
D
Secure and tighten all bolts.
NOTE: Do not pinch the wires.
ASSEMBLY
STEP 1
2.3T – 5.3T ASSEMBLY
A
Open
HARDWARE BAG 2
.
B
Place the console upside down on
a padded surface.
C
Attach the
CONSOLE SKIRT
by
partially inserting 2
SCREWS (B)
in the two inner attachment holes.
D
Align the
CONSOLE SKIRT
and
CONSOLE SHELL SEAM
. Partially
insert
SCREW (B)
and repeat for
other side.
E
Fully tighten all screws.
ASSEMBLY
STEP 2
STEP D: UPSIDE DOWN VIEW OF CONSOLE
BOLTS (A)
CONSOLE MAST
BASE FRAME
CONSOLE WIRES
CONSOLE SKIRT
CONSOLE
SCREWS (B)
CONSOLE SKIRT
SCREWS (B)
CONSOLE SHELL SEAM
BOLT (A)
15 mm
Qty: 6
HARDWARE BAG 1 CONTENTS :
SCREW (B)
12 mm
Qty: 4
HARDWARE BAG 2 CONTENTS :
A
Open
HARDWARE BAG 3
.
B
Connect
CONSOLE WIRES
.
C
Attach
CONSOLE
to
CONSOLE
MASTS
using 2
BOLTS (C)
.
D
Secure and tighten bolts.
NOTE: Do not pinch the wires.
3.3T & 5.3T models only:
A
Open
HARDWARE BAG
.
B
Attach left and right
HAND
RAILS
to
GRIP PULSE HAND
RAILS
and
BASE FRAME
using
4
BOLTS (A)
.
NOTE:
2.3T models do not
have hand rails and therefore
will NOT include HARDWARE
BAG 4 in the parts box.
2.3T-5.3T_Rev.2.0.indd 8-9
7/17/06 11:43:05 AM
