20
HOW TO SWITCH BETWEEN APP MODE & BT HEART RATE MODE
Home- P1
Connecting to HR Strap (off by default)
In order to access to
HR Strap mode
, make sure the
console is not currently connected to any Bluetooth (BT)
devices by checking that no BT Symbol is displayed on
the console.
Wear the HR strap, make sure to read the strap instruction.
Note: Some chest contact HR straps need to be moist to
read the HR precisely.
Press and hold the Bluetooth
button for a few seconds
until “HR MODE” symbol displays on the right LCD corner.
Once the console detects the BT HR strap, the BT symbol
will display on the LED screen.
To exit HR Strap mode, disconnect the BT HR device and
ensure the BT symbol disappears from the display. Then
press and hold Bluetooth
button for a few seconds
until “HR MODE” disappears on LED screen. NOTE: it
should take a few seconds for the Bluetooth to disconnect
from the console.
Hit
Start
to begin a workout and console should show the
heart rate.
Connecting to an App (default mode)
If using a 3rd party App, please turn on your device’s
Bluetooth (BT) and follow the App pairing instructions.
Ensure the bike console is not connected to any other BT
devices by checking that the BT symbol is not lit on the
console.
If you wish to use the BT HR Strap with a 3rd party App
that is capable, then connect to the HR strap from within
the App interface (please follow the App instructions to
find and connect to the HR Strap).
Follow the 3rd party App instructions to start the program.
Some require you to start from inside the App, others
require you to press the console
Start
button first.
To stop the workout, End Ride in the App and press
Stop
button on console for 3 seconds.
ENGLISH
