21
20
20
ASSEMBLY
STEP 7
13
14
15
12
M
15
A Open
HARDWARE BAG 7.
B Slide the right (R)
UPPER HANDLEBAR (13) onto
the right
LOWER HANDLEBAR (12) making sure
handlebars are joined together completely. Secure
the
UPPER HANDLEBAR (13) to the LOWER
HANDLEBAR (12) using PRE-ATTACHED SET SCREWS
(14).
C Slide right (R)
HANDLEBAR COVERS (15) over UPPER
HANDLEBARS (13) and attach using 1 SCREW (M).
D Repeat STEPS B–C on left side.
HARDWARE FOR STEP 7
PART
TYPE
DESCRIPTION
QTY
M
SCREW
M4X0.7PX8L
4
NOTE: Make sure upper handlebars are as far down
as possible. Handlebars can be damaged If not
secured correctly.
4
16
19
5
17
18
ASSEMBLY
STEP 8
NOTE: All hardware for this step is pre-installed.
A Remove 4
PRE-INSTALLED BOLTS (16) from the
CONSOLE (17).
B Attach the
CONSOLE CABLES (4) to the
CONSOLE (17).
C Carefully tuck the
CONSOLE CABLES (4) into the
CONSOLE MAST (5) before attaching the CONSOLE.
Attach
CONSOLE (17) to CONSOLE MAST (5) using
4
PRE-INSTALLED BOLTS (16).
D Slide
FRONT TOP CAP PIECE (18) and REAR TOP CAP
PIECE (19) over CONSOLE MAST (5) and snap into
place.
NOTE:
Do not to pinch any wires while attaching the console.
