7
ASSEMBLY STEP 7
NOTE:There is NO hardware bag for
this step. All hardware is pre-installed.
A) Attach the CONSOLE WIRES.
B) Carefully tuck the CONSOLE
MAST wires into the CONSOLE
MAST before attaching the CON-
SOLE.
C) Attach CONSOLE to the CON-
SOLE MAST using the 4 PRE-
ATTACHED SCREWS (screws will
have to be removed from the console
first).
DO NOT PINCH WIRES!
YOU’RE FINISHED!
ASSEMBLY STEP 8
Attach BOTTLE HOLDER to the
CONSOLE MAST using the 2 PRE-
ATTACHED SCREWS. (screws will have
to be removed from the console mast
first).
Connect ADAPTOR to a power outlet.
Locate the ON / OFF switch on the back of
the CONSOLE. Flip the switch to the ON
position. After a “beep”, the CONSOLE
will light up.
PRE-ATTACHED
SCREW
console
console wires
console mast
PRE-ATTACHED
SCREW
BOTTLE HOLDER
CONSOLE MAST
A)