98
5-1
If an Icon Is Displayed on the Error Screen
7200 to 7299
HP-200A
Communication Error
Cause and Solution
7200
Control Board Commu-
nication Error
Please call your local dealer.
7300 to 7399
Fore-edge Trim Section
Communication Error
Cause and Solution
7300
Control Board Commu-
nication Error
Please call your local dealer.
7400 to 7499
Top and Bottom Trim Sec-
tion Communication Error
Cause and Solution
7400
TBC-200L Control Board
Communication Error
Please call your local dealer.
8100 to 8199
SPF Section and CPU
Runaway
Cause and Solution
8100
SPF Section Control
Board QPM-236
Short Circuit Fault on
Sensor or Switch
The short circuit fault may be occurred on the sensor or switch.
Please call your local dealer.
8101
Panel Control Board
Watchdog Timer Error
(CPU Runaway Detection)
The computer is “lost,” and must be reset. Turn the power switch off, wait about a
minute, then turn it on again.
If the problem occurs again, please call your local dealer.
8102
SPF Section Control Board
Watchdog Timer Error
(CPU Runaway Detection)
The computer is “lost,” and must be reset. Turn the power switch off, wait about a
minute, then turn it on again.
If the problem occurs again, please call your local dealer.
8103
SPF Section
EEPROM Error
An EEPROM error occurred.
Please call your local dealer.
8200 to 8299
HP-200A Board Breakdown
Cause and Solution
8200
HP-200A Control Board
Input Fuse Blown
Input fuse F1 on the control board may be blown. Replace the fuse if necessary. If the
fuse is OK, please call your local dealer.
8201
HP-200A Control Board
Watchdog TImer Error
(CPU Runaway Detec-
tion)
The computer is “lost,” and must be reset. Turn the power switch off, wait about a
minute, then turn it on again.
If the problem occurs again, please call your local dealer.
8203
HP-200A
EEPROM Error
An EEPROM error occurred.
Please call your local dealer.
8300 to 8399
Fore-edge Trim Section
and CPU Runaway
Cause and Solution
8300
Fore-edge Trim Section
Control Board QPM-237
Input Fuse Blown
Input fuse F1 on the control board may be blown. Replace the fuse if necessary. If the
fuse is OK, please call your local dealer.
8301
Fore-edge Trim Section
Control Board
Watchdog Timer Error
(CPU Runaway Detection)
The computer is “lost,” and must be reset. Turn the power switch off, wait about a
minute, then turn it on again.
If the problem occurs again, please call your local dealer.
8303
Fore-edge Trim Section
EEPROM Error
An EEPROM error occurred.
Please call your local dealer.
8400 to 8499
Top and BottomTrim Sec-
tion and CPU Runaway
Refer to the user's manual for TBC-200L.
9100 to 9199
SPF Section etc.
Cause and Solution
9100
Calendar error
The date/time setting is incorrect. Set the date and the time again using the Informa-
tion-Main screen. (Refer to Section 1-3-10.) If the problem occurs again, please call
your local dealer.
9101
SPF Section Outside
Home Position Value
Range Error
The home position value called from the memory is out of the allowable range.
Press the Clear button and reset the home position value.
Please call your local dealer.
9200 to 9299
HP-200A etc.
Cause and Solution
9201
HP-200A Outside Home
Position Value Range Error
The home position value called from the memory is out of the allowable range.
Press the Clear button and reset the home position value. Please call your local dealer.
9300 to 9399
Fore-edge Trim
Section etc.
Cause and Solution
9301
Fore-edge Trim Section
Outside Home Position
Value Range Error
The home position value called from the memory is out of the allowable range.
Press the Clear button and reset the home position value. Please call your local
dealer.
Summary of Contents for Bookletmaker FC-200A
