42
3-2
Setting Up a Job Using the Setting Screen
4
Enter all of the dimensions.
- Enter the finishing size for saddle stitch or
fold only.
- Enter in steps of 0.1 mm (0.005").
A: Finishing Size
B: Stitch Distance
- We recommend you to adjust the stitch
distance within the ranges shown below:
If the top and bottom distance is 185
mm (7.285") or more
- 79.0 to 92.0 mm
- 138.0 to 151.0 mm
- 3.860” to 5.905"
If the top and bottom distance is shorter
than 185 mm (7.285")
- 79.0 to 80.9 mm
- If the stitch distance is adjusted outside
of this range, the folding or trimming
may be incorrect.
C: Booklet Thickness
Measure value using a caliper (accessory)
and enter the value within 0.1 to 4.0 mm
(0.004" to 0.15").
Finishing size
Top and Bottom
Max.
(with fore-
edge trim)
(For the
SPF-200A)
254.0mm or
10.000”
(250.0mm or
9.840”)
356.0mm or
14.000”
Max.
(For the
SPF-200L)
305.0 mm or
12.00”
356.0mm or
14.000”
Min.
85.0mm or
3.350”
120.0mm or
4.725”
11119
30201D1
Top and
Bottom
Finishing size
On a machine set to measure in inches, you
must set the stitch distance carefully so the
stitches do not hit the fold knife or booklet stop-
per. For details, see Section 1-3-3.
11119
30201F1
21102
30201E1
A
A
B
B
C
C
Finishing Size Screen
Select one of these
if you are using a
standard sheet
size.
Stitch Type
Select a stitch type from the 5
choices. (When using small
size sheets, the four stitch may
not be selected.)
Flat
Loop
Press this button to do
a fore-edge trim.
HOF Error
Icon
=
No changeover is done and the Binding screen is
displayed.
=
Each section returns to the home position before
starting the changeover.
=
The machine starts the changeover without sending
the parts to their home positions.
The actual positions of the guides and stoppers may be
different from the set positions. If there is a problem with
the binding quality, send all of the parts to the home posi-
tions before doing the changeover.
= Caution Icon for
Fold Skewing
= Caution Icon for
Crooked Trim
Summary of Contents for Bookletmaker FC-200A
