48
3-3
Doing a Changeover
- The screen shown to the right may be displayed
before you begin the changeover for corner stitch-
ing.
- This screen is used to confirm the stitcher head
positions.
- Select either icon.
A: The stitcher heads are positioned in the cutout
of the corner stitch guide.
B: The stitcher heads are positioned outside of the
cutout of the corner stitch guide.
- After making the right selection, press
.
This screen is displayed in the situations listed
below because the machine does not know the
current positions of the stitcher heads.
- First changeover since the power was turned on.
- If an Emergency Stop button is pressed during a
changeover.
If the stitcher heads are positioned in the cutout of
the corner stitch guide, the stitcher heads will
interfere with the guide during the changeover.
This screen appears to prevent a case where the
stitcher heads hit the corner stitch guide.
11119
30301W1
A
B
11119
30301X1
11119
30301Y1
Stitcher Head Position Confirmation Screen
Corner Stitch Guide
Cutout
Summary of Contents for Bookletmaker FC-200A
