120
6-4
Lubrication
Lubricate the following parts in specified fre-
quency. The icons to the right show how to
lubricate the parts.
6-4-1 Top and Bottom Guide Slide Shaft
Lubrication frequency = once a month
1
Turn off the power switch.
2
Wipe any dust off of the slide shaft
with a waste cloth.
3
Apply a light coat of grease
(accessory) on the slide shaft.
6-4-2 Stitcher Vertical Slide Shaft
Lubrication frequency = once a month
1
Turn off the power switch.
2
Wipe any dust off of the slide shaft
with a waste cloth.
3
Lubricate the slide shaft with oil
(accessory).
6-4-3 Fold Knife Section
Lubrication frequency = once a month
1
Turn off the power switch.
2
Add ten drops of oil into the lubri-
cation cup.
- Add the oil in small amounts so that it does
not spill out of the lubrication cup.
Turn off the power switch when lubricat-
ing. Otherwise, the machine may start sud-
denly, causing severe personal injury.
CAUTION
These icons show how to lubricate]
= Apply grease with a brush.
= Lubricate with oil.
11119
60401B1
Slide Shaft
11119
60402A1
Slide Shaft
11119
60403A1
Lubrication Cup
6-4-1 Top and Bottom Guide Slide Shaft
Summary of Contents for Bookletmaker FC-200A
