36
3-3 Enter the Job Information Using the Setting Screens
This section explains the steps necessary to input the
job information.
Select the binding type.
- Select the binding type on the Binding Mode
Screen.
: Binding with cover sheets
: Binding without cover sheets
- If you select binding without cover sheets, the
side glue rollers should be moved out of the
working positions. Refer to page 44. The side
glue roller on the operator side is controlled by
the computer. The side glue roller on the far
side must be set manually.
- If you select binding without cover sheets, the
support plate and the shims (1 mm) should be
installed. (Refer to page 59 to install the shim.)
If the support plate is not installed, the bound
book will fall on the stacker and separate.
Decide whether the machine
should home all parts on every
changeover, and the starting mode.
- Turn the home positioning feature ON or OFF
on the Start Mode Screen.
- Select the operation starting mode on the
Start Mode Screen.
Input the book block size.
- Input the book block size using the Book
Block Size Screen. Refer to page 12.
: Reset the guides to the home
position on every changeover.
: Reset the guides to the home
position on the first changeover.
The guide moves directly to the set
position from the second changeover.
: Binding operation starts with start
buttons.
: Binding operation starts when the
time which has been set on the box
passes after the book block is
inserted into the carriage clamp.
When selecting, input the start
waiting time.
Summary of Contents for BQ-270
Page 60: ...54...
Page 102: ...96...
Page 120: ...114 9 4 Option Extractor VS 270 1 pc Weekly Timer 1 pc...
