60
4-7 Milling Depth Adjustment
Change the number of shims.
- Increase or decrease the number of shims on
each side equally to adjust the level plate
height.
- The level plate can be pushed up by pushing
the pin on the bottom.
- There are three thicknesses of shims: 1, 1.5
and 2 mm (0.04”, 0.06”, and 0.08”). You can
add shims together to increase the thickness.
There are three kinds of shims. Use just
one shim or two shims together. Do not
use three shims together. Othewise the
level plate height becomes too high and
the booklet detect sensor can not detect
the booklet correctly.
- Insert each shim completely.
The level plate and book block are raised
by the increased shim thickness, and the
milling depth decreases by the same
amount. The less the milling depth, the less
the load on the milling mechanism.
Turn the Emergency Stop button
clockwise to release.
- The Single Operation Screen appears.
Press the Carriage Clamp Move
button on the Single Operation
Screen.
Press the Start buttons twice.
- Press the start button once and the carriage
clamp returns to the left side. Press it again
and the clamp rail lower and the carriage
clamp opens.
Total Shim
Thickness (mm)
Milling Depth (mm)
0
3 mm (0.12”)
1
2 mm (0.08”)
1.5
1.5 mm (0.06”)
2
1 mm (0.04”)
1 and 1.5
0.5 mm (0.02”)
1 and 2
0
Level Plate
Shim
Shim
1
2
3
3
Summary of Contents for BQ-270
Page 60: ...54...
Page 102: ...96...
Page 120: ...114 9 4 Option Extractor VS 270 1 pc Weekly Timer 1 pc...
