BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
NOTE:
There is NO hardware bag for this step.
All hardware is pre-installed.
A) Snap the front and back
HANDLEBAR
COVERS
together onto the
UPPER HANDLE
BARS
.
Note the position of the snap tabs on the
covers before snapping into position.
B) Attach the
CONSOLE WIRES
to the
CONSOLE
.
C) Carefully tuck the
CONSOLE MAST
wires
into the
CONSOLE MAST
before attaching
the
CONSOLE
.
D) Attach
CONSOLE
to the
CONSOLE MAST
using the 4
PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
YOU’RE FINISHED!
NUT (K)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (J)
60 mm
Qty: 2
SPACER (H)
44 mm
Qty: 2
TEFLON WASHER (I)
28.4 mm
Qty: 4
SCREW (L)
Qty: 2
HARDWARE BAG FOR STEP 5 CONTENTS :
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
FRONT
HANDLEBAR
COVER
FRONT
HANDLEBAR
COVER
BACK
HANDLEBAR
COVER
ASSEMBLY
STEP 5
(CONTINUED)
Connect
AC ADAPTOR
to the
AC ADAPTOR INPUT,
located at front of the main frame. Connect
ADAPTOR
to a power outlet. After a “beep”, the
CONSOLE
will light up.
ASSEMBLY
STEP 6
