Horizon Fitness CX-66, User Manual

BEFORE

YOU 
BEGIN

14

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ASSEMBL

Y

BEFORE

YOU 
BEGIN

ELLIPTICAL

OPERA

TION

LIMITED

W

ARRANTY

TROUBLESHOOTING

& 

MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE YOU 

BEGIN

ASSEMBL

Y

15

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ELLIPTICAL OPERA

TION

CONDITIONING GUIDELINES

TROUBLESHOOTING & 

MAINTENANCE

LIMITED WARRANTY

ASSEMBLY

 STEP 9

LOWER HANDLEBAR

LOWER LINK ARM

INSIDE

ELBOW COVER

OUTSIDE

ELBOW COVER

SCREW (L)

CONSOLE

CONSOLE WIRES

PRE-ATTACHED
SCREWS

ASSEMBLY

 STEP 8

SCREWS (Q)

INSIDE ELBOW COVER

OUTSIDE ELBOW COVER

ELBOW JOINT

A) Open 

HARDWARE BAG FOR STEP 8.

B) Attach the 

OUTSIDE ELBOW COVER

 to the 

ELBOW JOINT

 using 1 

SCREW (Q)

.

C) Snap the 

INSIDE ELBOW COVER

 onto the 

OUTSIDE ELBOW COVER

. 

 Note the position of the snap tabs before snapping into position.

D) Attach the 

INSIDE ELBOW COVER

 to the 

ELBOW JOINT

 using 1 

SCREW (Q)

.

E) Repeat on other side.

NOTE: There is NO hardware bag for this step. All hardware is pre-installed. 

A) Attach the 

CONSOLE MAST

 wires to the 

CONSOLE

 wires .

B) Carefully tuck the 

CONSOLE MAST

 wires into the 

CONSOLE MAST 

before attaching the 

CONSOLE

.

C) Attach 

CONSOLE

 to the 

CONSOLE MAST

 using the 4 

PRE-ATTACHED SCREWS 

(screws will have to be removed 

from the console first).

DO NOT PINCH WIRES!

Connect 

AC  ADAPTOR

  to  the 

AC  ADAPTOR  INPUT,

  located  at  front  of  the  main  frame.  Connect 

ADAPTOR

 to a power outlet. Locate the 

ON / OFF

 switch on the back of the 

CONSOLE

. Flip the switch 

to the 

ON

 position. After a “beep”, the 

CONSOLE

 will turn on.

HARDWARE BAG FOR STEP 8 CONTENTS :

SCREW (Q)
15 mm
Qty: 4

YOU’RE FINISHED!

CX-66_Elliptical_Rev.1.6.indd   14-15

6/13/07   1:26:49 PM