4
5
CONSOLE
ON/OFF SWITCH
CIRCUIT BREAKER
POWER CORD
CONSOLE CONTROLS AND DISPLAY WINDOWS
USB PORT AND AUDIO IN JACK
SAFETY KEY PLACEMENT
ROLLER END CAP
REAR ROLLER TENSION/ADJUSTMENT BOLTS
SPEAKERS
WATER BOTTLE HOLDER
GRIP PULSE HANDRAILS
DROP-DOWN HANDLEBAR
TRANSPORT WHEEL
READING RACK / AUDIO CORD CHANNEL
HANDLEBARS
MOTOR COVER
SIDE RAIL
CONSOLE MAST
RUNNING BELT / RUNNING DECK
TooLS INCLUDED:
F
8 mm T-Wrench
F
5 mm T-Wrench
F
5 mm L-Wrench
F
Screwdriver
PARTS INCLUDED:
F
1 Console Assembly
F
2 Console Masts
F
1 Hardware Kit
F
1 Safety Key
F
1 Power Cord
F
1 Audio Adapter Cable
If you have questions or if
there are any missing parts,
contact your local dealer.
NEED HELP?
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
from packaging until specified to do so in the assembly instructions. You may
remove the plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this
unit. Never open box when it is on its side. Once the banding straps have been removed,
do not lift or transport this unit unless it is fully assembled. Unpack and assemble the unit
where it will be used. Never grab hold of any portion of the incline frame and attempt to
lift or move the treadmill.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
( T4000 )
PRE
ASSEMBLY
T4000
SHOWN
