8
9
A Open
hardware for step 3
.
b connect handlebar cables
, and slide
handlebars
into
center bar
.
C Attach
handlebars
to
center bar
using 4
bolts (e)
, 4
spring washers (f)
and 4
arc
washers (g)
.
NOTE: Do not pinch wires while attaching the
handlebars. Please do not tighten the screws of
handlebar, tighten them when assembly process
is completed.
BOLT (E)
M6 x 12 mm
Qty: 4
SPRING WASHER (F)
6.2 mm
Qty: 4
ARC WASHER (G)
Φ
6.2 x
Φ
14
Qty: 4
ASSEMBLY
STEP 3
ASSEMBLY
STEP 4
A
Open
hardware for step 4
.
B
With the
console
upside down, attach the
console mast caps
to the
console
using 6
bolts (J) , 6 spring washers
(b)
and 6
flat washers (i)
.
BOLT (J)
M8 x 20mm
Qty: 6
ARC WASHER (I)
Φ
8.2 x
Φ
16
Qty: 6
SPRING WASHER (B)
8.2 mm
Qty: 6
HARDWARE foR STEP 4
:
HARDWARE foR STEP 3
:
NOTE: The console mast caps are marked with an
L if they are to be used on the left-hand side of the
treadmill or an R if they are to be used on the right-
hand side of the treadmill. If the console mast caps
are assembled on the incorrect side of the treadmill,
the unit will not assemble correctly.
Elite
T
5000
Elite
T
5000
CONSOLE CABLES
HANDLEBARS
CENTER BAR
BOLTS (E)
SPRING WASHERS (F)
ARC WASHERS (G)
FLAT WASHERS (I)
CONSOLE MAST CAP
SPRING WASHERS (B)
BOLTS (J)
CONSOLE (upside down)
