Horizon Fitness Endurance 200, Owner'S Manual

F O L D I N G   Y O U R   E L L I P T I C A L   T R A I N E R

Note:

It is important to always follow the correct order of steps when folding your

elliptical trainer.

STEP 1:

The first step is to position the elliptical pedal arms in the proper posi-

tion. The pedal arms can be positioned in two different positions for convenience.
The first position is to rotate the left pedal arm so that it is in the backmost posi-
tion (the left pedal arm wheel should be positioned at the rear of the elliptical
trainer). The second position would be to rotate the right pedal arm in the back-
most position.

STEP 2:

Carefully raise both the pedal arm (in the backmost position) and guide

rail simultaneously.

STEP 3:

Press and hold the lock latch button located underneath the guide rail

end cap. Align the lock latch with the lock latch receiver located underneath the
pedal arm. Insert the lock latch receiver into the lock latch. Release the lock latch
button once the lock latch is secure.

STEP 4:

Repeat process for alternate side.

Note:

It is important to always follow the correct order of steps when unfolding

your elliptical trainer.

STEP 1: 

Firmly grasp both the left pedal arm and guide rail. Press and release

the lock latch receiver from the lock latch. Carefully lower the pedal arm and guide
rail, standing to the side to avoid any accidental release of the alternate pedal arm
and guide rail.

STEP 2:

Repeat process for alternate side.

U N F O L D I N G   Y O U R   E L L I P T I C A L

T R A I N E R

27

Endurance Series

8

Endurance Series

R O U T I N E   M A I N T E N A N C E

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our ellipticals so lubrication is not needed. The
most important maintenance step is to simply wipe your perspiration off the train-
er after each use.

HOW DO I CLEAN MY HORIZON FITNESS
ELLIPTICAL TRAINER?

Clean with soap and water cleaners only. Never use solvents on plastic parts.

Cleanliness of your Horizon Fitness elliptical trainer and its operating environment
will keep maintenance problems and service calls to a minimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule
be followed.

AFTER EACH USE (DAILY)

Turn off the elliptical trainer with the on/off switch, and unplug the power cord
from the wall outlet.

WARNING!

To remove power from the elliptical, the power cord must be disconnected from
the wall outlet. (Endurance 300 only)

•

Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they

can cause damage to the elliptical.

•

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

•

Make sure the power cord is not underneath the elliptical trainer or in any other

area where it can become pinched or cut.

EVERY WEEK

Clean underneath the elliptical, following these steps:

•

Turn off the elliptical trainer with the on/off switch.

•  

Then unplug the power cord at the wall outlet. (Endurance 300 only)

•

Move the elliptical trainer to a remote location.

•

Wipe or vacuum any dust particles or other objects that may have accumulated

underneath the elliptical.

•

Return the elliptical trainer to its previous position.

EVERY MONTH

•

Inspect all assembly bolts and pedals on the machine for proper tightness.

M-Class old console endurance owner’s guidev1.1.qxd  2/19/2003  3:15 PM  Page 9