BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP 2
GUIDE RAIL CAPS
NOTE: There is NO hardware bag for this step.
A) Slide
GUIDE RAIL CAPS
into the
GUIDE RAIL
to seal the openings
.
WAVY WASHER (D)
CRANK
BOLT (G)
WASHER (I)
WASHER (H)
RIGHT PEDAL ARM
RIGHT LOWER LINK ARM
WASHERS (S)
SPACER (R)
BOLT (T)
WASHER (U)
FOOTPAD
LINK ARM
SCREWS (F)
ASSEMBLY
STEP
WAVY WASHER (D)
CRANK
BOLT (G)
WASHER (I)
WASHER (H)
RIGHT PEDAL ARM
RIGHT LOWER LINK ARM
WASHERS (S)
SPACER (R)
BOLT (T)
WASHER (U)
FOOTPAD
LINK ARM
SCREWS (F)
A) Open
HARDWARE BAG FOR STEP 3.
B) Attach
FOOTPAD
to
PEDAL ARM
using 4
SCREWS (F)
.
C) Align the bracket on the
RIGHT LOWER LINK ARM
with the tube on the
RIGHT PEDAL ARM
.
D) Slide the
SPACER (R)
through the
LINK ARM BRACKET
and the
PEDAL ARM
so it can’t rotate.
E) Insert 2
WASHERS (S)
between the
PEDAL ARM
and the
LINK ARM BRACKET
.
F) Secure the joint with a
FLAT WASHER (U)
and
BOLT (T)
.
G) Attach
PEDAL ARM
to the
CRANK
with 1
BOLT (G)
, 1
WASHER (I),
1
WAVY WASHER (D)
and 1
WASHER (H)
.
H) Repeat on other side.
SCREW (F)
12 mm
Qty: 8
BOLT (G)
13 mm
Qty: 2
BOLT (T)
15 mm
Qty: 2
SPACER (R)
70 mm
Qty: 2
WASHER (H)
Qty: 2
WASHER (U)
35 mm
Qty: 2
WASHER (S)
30 mm
Qty: 4
WASHER (I)
Qty: 2
WAVY WASHER (D)
Qty: 2
angle view
HARDWARE BAG FOR STEP CONTENTS :
EX-67_Rev.1.6.indd 8-9
7/7/08 4:29:13 PM
