BEFORE
YOU
BEGIN
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
CONSOLE
CONSOLE WIRES
PRE-ATTACHED
SCREWS
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach the
CONSOLE MAST
wires to the
CONSOLE
wires .
B) Carefully tuck the
CONSOLE MAST
wires into the
CONSOLE MAST
before attaching the
CONSOLE
.
C) Attach
CONSOLE
to the
CONSOLE MAST
using the 4
PRE-ATTACHED SCREWS
(screws will have to be removed
from the console first).
DO NOT PINCH WIRES!
Connect
AC ADAPTOR
to the
AC ADAPTOR INPUT,
located at front of the main frame. Connect
ADAPTOR
to a power outlet. Locate the
ON / OFF
switch on the back of the
CONSOLE
. Flip the switch
to the
ON
position. After a “beep”, the
CONSOLE
will turn on.
YOU’RE FINISHED!
EX-67_Rev.1.6.indd 14-15
7/7/08 4:29:24 PM
