BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
TOP CAP
CONSOLE MAST BOOT
CONSOLE MAST
MAIN FRAME
CONSOLE WIRE
FLAT WASHER (D)
SPRING WASHER (C)
BOLT (B)
ARC WASHER (E)
ASSEMBLY
STEP 2
A) Open
HARDWARE BAG FOR STEP 2.
B) Slide the
CONSOLE MAST BOOT
followed by the
TOP CAP
over the
CONSOLE MAST
.
C) Carefully pull the
CONSOLE WIRES
through the
CONSOLE MAST
using the twist tie located inside the
CONSOLE MAST
.
D) Attach the sides of the
CONSOLE MAST
to the
MAIN FRAME
using 4
BOLTS (B),
4
SPRING WASHERS (C)
and 4
FLAT WASHERS (D).
E) Attach the front of the
CONSOLE MAST
to the
MAIN FRAME
using 2
BOLTS (B),
2
SPRING WASHERS (C)
and 2
ARC WASHERS (E).
F) Slide
TOP CAP
and
CONSOLE MAST BOOT
down to seal the console mast hole.
BOLT (B)
15 mm
Qty: 6
SPRING WASHER (C)
15.4 mm
Qty: 6
FLAT WASHER (D)
20 mm
Qty: 4
ARC WASHER (E)
17 mm
Qty: 2
HARDWARE BAG FOR STEP 2 CONTENTS :
TOP CAP
CONSOLE MAST BOOT
CONSOLE MAST
MAIN FRAME
CONSOLE WIRE
FLAT WASHER (D)
SPRING WASHER (C)
BOLT (B)
ARC WASHER (E)
ASSEMBLY
STEP 1
A) Open
HARDWARE BAG FOR STEP 1.
B) Attach the
FRONT STABILIZER TUBE
to the the
MAIN FRAME
using 2
BOLTS (A)
.
BOLT (A)
20 mm
Qty: 2
HARDWARE BAG FOR STEP 1 CONTENTS :
FRONT STABILIZER TUBE
BOLT (A)
MAIN FRAME
EX-77_Rev.1.6.indd 8-9
7/1/08 8:17:38 AM
