10
11
ASSEMBLY
STEP 5
A gently attach the
lEft WAtER BottlE HolDER
to the
conSolE
with front edge facing down.
B Once the
lEft WAtER BottlE HolDER
is in
place carefully push through the
WAttER BottlE
HolDER
to its position until you hear a“click”at rear
edge.
C Make sure the
lEft WAtER BottlE HolDER
is
well assembled then fix it with 1
ScREW (k)
from
the back.
D Repeat the previous step on the opposite side.
HARDWARE foR STEP 5
:
LEFT WATER
BOTTLE HOLDER
SCREW (K)
RIGHT WATER
BOTTLE HOLDER
SCREW (K)
Φ
4 x 10
Qty: 2
(PARAgON 6)
(PARAgON 6)
ASSEMBLY
STEP 5
HARDWARE BAG 5
:
A
Open
HARDWARE BAG 5.
B
Carefully attach
RiGHt conSolE mASt
oUtER
&
innER coVER
together using 4
ScREWS (J)
.
C
Repeat the step B on the opposite side.
RIGHT HANDLEBAR
RIGHT COVER
LEFT COVER
SCREW (J)
SCREW (J)
Φ
4 x 12
Qty: 8
NOTE: Connect and screw in the outer cover
before fixing the inner cover.
Be careful not to
scratch or brake the plastic while assembling.
Make sure the cover set is centered and well
assembled before tighten the screws.
Paragon 6
Shown
Paragon 6
Shown