3. Operation Procedures
65
When stitch position is not aligned with the
folded line even if sheets are folded correctly,
correct stitch position.
1.
Turn stitch position correct knob.
NOTE
- When stitch position is corrected, check and
adjust the fold section so that two stitches
aligned with the fold line.
3-1 Test Binding
3-1-4 Fold Knife Height Adjustment
This section shows how to adjust fold knife
height according to number of sheets and the
sheet thickness.
-
For thin sheets, turn fold knife height
adjust knob clockwise to raise fold knife.
-
For thick sheets, turn fold knife height
adjust knob counterclockwise to lower fold
knife.
NOTE
- To set the standard height, turn fold knife
height adjust knob fully clockwise and then
turn fold knife height adjust knob counter-
clockwise three turns.
CAUTION
If the knife is raised too much when the
fold roller gap is narrow or the top and
bottom width of the booklet is small, the
knife may hit the folding roller.
STITCHER & FOL
DER
STITCHER & FOLDER
SPF-20A
Fold Knife Height
Adjust Knob
3-1-5 Stitch Position Correction
Stitch Position
Correct Knob
Turn knob counterclockwise.
Turn knob clockwise.
