EN
5
REAR STEERING MODES
TRANSMITTER FUNCTIONS
The AX24 XC-1 features both front and rear steering. There are
three steering modes to manage how the rear steering responds
to the steering wheel. The steering mode is selected from the
transmitter with the three position switch.
IMPORTANT:
Steering trim only affects the front wheels.
• In all modes the front wheels operate normally.
• Up is crab mode where the rear wheels steer the same
direction as the front so the entire vehicle can crab sideways.
• Down is mirror mode where the rear wheels steer opposite
the front wheels to tighten the turning radius.
• Center is front steer only mode, where the rear wheels do
not steer.
• Press up or down on the three position switch to change from
front steer only.
• When changing from one of the dual steering modes, you
must first toggle back to front steer only.
A. Throttle Trim
Adjusts the throttle neutral point.
B. Steering Trim
Adjusts the front steering center point. Normally, the steering
trim is adjusted until the vehicle tracks straight.
C. LED
• Solid red lights: Indicates the power is ON and adequate
battery power.
• Flashing red lights: Indicates the battery voltage is critically
low. Replace batteries.
D. Steering Wheel
E. Throttle/Brake
F. Steering Rate
On-The-Fly knob for travel adjustment on the steering.
G. Steering Mode
3 position switch.
H. Throttle Limit
Limits throttle output to 50/75/100%
Select 50% or 75% for less experienced drivers or when you
are driving the vehicle in a small area.
I. Throttle (TH) Servo Reversing
Move the switch to reverse the throttle channel.
J. Steering (ST) Servo Reversing
Move the switch to reverse the steering channel.
K. Power Button
A.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
Specifications
Power Supply:
4 AA Batteries
Operating Frequency:
2.4GHz
Transmit Power:
<100mw
Control Protocol:
SLT
Control:
Proportional Steering and Throttle/Brake with Trim
Knobs, Third Channel with Three Position Switch.
Auxiliary Functions:
Three Position Throttle Limit Switch,
Steering Rate Knob to Change Steering Travel on-the-fly,
Programmable Servo Travel for Steering and Throttle/Brake.