6
EN
IMPORTANT:
Consult local laws and ordinances before installing and operating any type of photograph-capable or video recording device in this product.
Mounting a Camera
1
2
Installing the Included Camera Frame to the Isolation Mount
*
Camera not included
Copper Foil Sheilding Instructions
Assembling the Isolation Mount
*
The Blade
®
350 QX2 includes two adhesive-backed,
metal-foil sheets to provide GoPro
®
users with an
extra measure of RF-shielding.
A
B
B
2
3
4
1. Fold the inner “T” sheet
(A)
around the
camera with the metallic side facing away
from the camera so it covers the top, sides
and back.
DO NOT peel off the backing.
2. Peel the backing off the rectangular sheet
(B).
3. Wrap sheet
B
around the back of sheet
A,
sealing all the rear edges and holding
everything together.
4. The shield is removable and is held in place
by the 350 QX2 camera mount.
The front and bottom of the camera are left
unshielded to allow any RF noise to radiate out
and away from the 350 QX2.
A
A
1
B
DO NOT peel off
the backing
WARNING:
Always disable Wi-Fi before fl ying the Blade 350 QX2 with a GoPro camera. If Wi-Fi is not disabled, interference may cause loss of control,
which could result in a crash.
Summary of Contents for Blade 350 QX2
Page 1: ...Instruction Manual ...