background image

EN

3

Table of Contents

Safety Precautions and Warnings ...........................................................................2
Included / Recommended Equipment .....................................................................3
General Binding Tips and Failsafe 

BNF

 ...................................................................3

SAFE

®

 Select Technology 

BNF

 ................................................................................4

SAFE Select Flying Tips 

BNF

...................................................................................4

Transmitter Setup 

BNF

 ...........................................................................................4

Dual Rates and Control Throws ..............................................................................5
Receiver Selection and Installation 

PNP

 .................................................................5

Battery Installation and ESC Arming .......................................................................5
General Binding Tips and Failsafe 

BNF

 ...................................................................6

Transmitter and Receiver Binding / Enabling and Disabling SAFE Select 

BNF

..........6

Model Assembly ................................................................................................7–8
Control Surface Centering ......................................................................................8
Integrated ESC Telemetry .......................................................................................9
SAFE

®

 Select Switch Designation 

BNF

 ...................................................................9

Control Surface Direction .....................................................................................10
Center of Gravity (CG) ..........................................................................................10

Propeller Installation ............................................................................................11
In Flight Trimming 

BNF

 .........................................................................................11

Post Flight............................................................................................................11
Motor Service ......................................................................................................11
Troubleshooting Guide AS3X 

BNF

 .........................................................................12

Troubleshooting Guide .........................................................................................12
Replacement Parts ...............................................................................................13
Recommended Items ...........................................................................................13
Optional Items .....................................................................................................13
Important Federal Aviation Administration (FAA) Information .................................13
AMA National Model Aircraft Safety Code .............................................................13
Limited Warranty .................................................................................................14
Contact Information .............................................................................................14
FCC Information ...................................................................................................15
IC Information ......................................................................................................15
Compliance Information for the European Union ...................................................15

36.4in (925mm)

34in (863.5mm)

General Binding Tips and Failsafe 

BNF

•  The included receiver has been specifically programmed for operation of this 

aircraft. Refer to the receiver manual for correct setup if the receiver is replaced. 

•  Keep away from large metal objects while binding. 
•  Do not point the transmitter’s antenna directly at the receiver while binding.
•  The orange LED on the receiver will flash rapidly when the receiver enters bind 

mode.

•  Once bound, the receiver will retain its bind settings for that transmitter until 

you re-bind. 

•  If the receiver loses transmitter communication, the failsafe will activate. 

Failsafe moves the throttle channel to low throttle. Pitch and roll channels move 

to actively stabilize the aircraft in a descending turn.

•  If problems occur, refer to the troubleshooting guide or if needed, contact the 

appropriate Horizon Product Support office.

*battery range: 3S LiPo 600mAh–850mAh

WARNING:

 We do not recommend using the Avian ESC reversing feature 

with this model.

Motor:

 2405–1200Kv Brushless Outrunner, 14 pole 

(SPMXAM2300)

Installed

Installed

ESC:

 Avian

 15A Brushless Smart ESC with IC2 

(SPMXAE1015C)

Installed

Installed

Servos:

 Elevator/Rudder (2) A346 8g Sub-Micro Digital 

(SPMSA346); Aileron (1) A347 9g Sub-Micro Digital MG 

(SPMSA347)

Installed

Installed

Receiver: 

Spektrum

 AR630 DSMX 6-Channel AS3X & 

SAFE Receiver (SPMAR630)

Installed Required to 

Complete

Recommended Battery*:

 3S 11.1V 600mAh Smart G2 

LiPo Battery: IC2 (SPMX6003S50)

Required to 

Complete

Required to 

Complete

Recommended Battery Charger: 

3-4-cell Li-Po battery balancing charger

Required to 

Complete

Required to 

Complete

Recommended Transmitter: 

6+ channel, Full-Range 2.4GHz with Spektrum

 

DSM2

®

/DSMX

®

 technology and adjustable dual rates

Required to 

Complete

Required to 

Complete

Included / Recommended Equipment

Without battery: 308g

With 3S 600mAh battery: 369g

Summary of Contents for E-flite Eratix 3D Flat Foamy 860mm

















Reviews: