EN
17
IMPORTANT:
If using the buddy box option for training on a transmitter other
than the included DXS use these settings for a Master and or Slave Transmitter.
Failure to do so will not allow SAFE technology Flight modes to work correctly.
IMPORTANT:
If using the buddy box option the transmitter must be configured
using the Transmitter Setup and Buddy Box setup charts.
Master Transmitter Setup
Master Transmitter
Master Setup
DX4e, DX5e (2pos)
Factory Trainer Settings
DX4e, DX5e (3pos)
Factory Trainer Settings
DXe
Factory Trainer Settings
DX6i
Factory Trainer Settings
DX7
Trainer to Normal
DX6
DX7s
DX7(G2)
DX8
DX8(G2)*
DX9
DX10t
DX18
DX20
Activate Programmable Master and insure
channels Thro - Aux 1 are set to slave.
Buddy Box Setup
Slave Transmitter Setup
Slave Transmitter
Slave Setup
DX4e, DX5e (2pos)
Factory Trainer Settings
DX4e. DX5e (3pos)
Factory Trainer Settings
DXe
Factory Trainer Settings
DX6i
Factory Trainer Settings
DX7
Factory Trainer Settings
DX6
DX7s
DX7(G2)
DX8
DX8(G2)
DX9
DX10t
DX18
DX20
Factory Trainer Settings
Flight Training
Instruction
To the new pilot:
This aircraft is easy to fly and helps you apply beginner skills to flying;
however, we recommend you get help from a qualified flight instructor for your
first radio controlled flights. Some model flying clubs provide flight training at
their flying fields. Find a nearby flying club through your local hobby shop. In
the U.S., visit the Academy of Model Aeronautics at www.modelaircraft.org for
more information on clubs and flight instruction.
To the flight instructor:
Feel free to experiment with the SAFE technology before instructing your
student on this aircraft. The progressive switch positions in the SAFE
technology are intended for a new pilot to learn with minimal instructor
assistance. We recommend using Channel 5 Switch Position 1 to instruct a new
pilot. Switch positions 0 and 2 may stabilize the aircraft more or less than you
desire for instruction purposes.
DXS Wireless Trainer Feature
Your DXS transmitter may be connected to another transmitter through the
SRXL2 DSMX Remote Receiver (SPM9747, sold separately).
The DXS transmitter is ideal as the master as it is compatible with all Spektrum
transmitters when using this feature. Servo reversing and trims must be the
same on both transmitters.
This “buddy box” approach has helped many new pilots get the feel for
aircraft control with the close assistance of a flight instructor. Connecting two
transmitters enables your flight instructor to hold the master transmitter while
you hold the slave transmitter. While you learn to fly, the instructor holds the
trainer switch to give you control of the aircraft. If you need help, the flight
instructor can release the switch to take control.
IMPORTANT:
If a transmitter other than the included DXS is used for master or
slave, refer to Buddy Box Setup in this manual.
Remote Receiver Installation
1. Open the battery door
2. Connect the remote receiver cable to the wireless trainer port.
3. Install the remote receiver in the cavity behind the battery door with double
sided tape.
Wireless Trainer Port
SRXL2 DSMX
Remote Receiver
Master
Slave
Back
Trainer Button