background image

EN

15

Instruction Manual

Limited Warranty

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original 

purchaser that the product purchased (the “Product”) will 

be free from defects in materials and workmanship at the 

date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) 

cosmetic damage, (ii) damage due to acts of God, accident, 

misuse, abuse, negligence, commercial use, or due to 

improper use, installation, operation or maintenance, 

(iii) modification of or to any part of the Product, (iv) 

attempted service by anyone other than a Horizon Hobby 

authorized service center, (v) Product not purchased from 

an authorized Horizon dealer, or (vi) Product not compliant 

with applicable technical regulations, or (vii) use that 

violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 

MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 

HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED 

WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE. THE 

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE 

DETERMINED THAT THE PRODUCT WILL SUITABLY MEET 

THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and 

exclusive remedy shall be that Horizon will, at its option, 

either (i) service, or (ii) replace, any Product determined 

by Horizon to be defective. Horizon reserves the right 

to inspect any and all Product(s) involved in a warranty 

claim. Service or replacement decisions are at the sole 

discretion of Horizon. Proof of purchase is required for all 

warranty claims. SERVICE OR REPLACEMENT AS PROVIDED 

UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND 

EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF 

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY 

WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED 

IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT 

LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF 

HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES. Further, in no event shall the liability 

of Horizon exceed the individual price of the Product on 

which liability is asserted. As Horizon has no control over 

use, setup, final assembly, modification or misuse, no 

liability shall be assumed nor accepted for any resulting 

damage or injury. By the act of use, setup or assembly, the 

user accepts all resulting liability. If you as the purchaser 

or user are not prepared to accept the liability associated 

with the use of the Product, purchaser is advised to return 

the Product immediately in new and unused condition to 

the place of purchase.

Law

These terms are governed by Illinois law (without regard to 

conflict of law principals). This warranty gives you specific 

legal rights, and you may also have other rights which vary 

from state to state. Horizon reserves the right to change or 

modify this warranty at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot 

provide warranty support or service. Once assembly, setup 

or use of the Product has been started, you must contact 

your local distributor or Horizon directly. This will enable 

Horizon to better answer your questions and service 

you in the event that you may need any assistance. For 

questions or assistance, please visit our website at www.

horizonhobby.com, submit a Product Support Inquiry, or call 

the toll free telephone number referenced in the Warranty 

and Service Contact Information section to speak with a 

Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is 

compliant in the country you live and use the Product in, 

please use the Horizon Online Service Request submission 

process found on our website or call Horizon to obtain a 

Return Merchandise Authorization (RMA) number. Pack 

the Product securely using a shipping carton. Please note 

that original boxes may be included, but are not designed 

to withstand the rigors of shipping without additional 

protection. Ship via a carrier that provides tracking and 

insurance for lost or damaged parcels, as Horizon is not 

responsible for merchandise until it arrives and is accepted 

at our facility. An Online Service Request is available 

at http://www.horizonhobby.com/content/service-center_

render-service-center. If you do not have internet access, 

please contact Horizon Product Support to obtain a RMA 

number along with instructions for submitting your product 

for service. When calling Horizon, you will be asked to 

provide your complete name, street address, email address 

and phone number where you can be reached during 

business hours. When sending product into Horizon, please 

include your RMA number, a list of the included items, and 

a brief summary of the problem. A copy of your original 

sales receipt must be included for warranty consideration. 

Be sure your name, address, and RMA number are clearly 

written on the outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If 

you have any issue with a LiPo battery, please 

contact the appropriate Horizon Product Support 

office.

Summary of Contents for UMX Gee Bee




















Reviews: