background image

EN

16

UMX

 Gee Bee

®

10/15

Contact Information

Warranty Requirements

For Warranty consideration, you must include 

your original sales receipt verifying the proof-of-

purchase date.

 Provided warranty conditions have been 

met, your Product will be serviced or replaced free of 

charge. Service or replacement decisions are at the sole 

discretion of Horizon.

Non-Warranty Service

Should  your  service  not  be  covered  by  warranty, 

service will be completed and payment will be required 

without notification or estimate of the expense unless 

the expense exceeds 50% of the retail purchase cost

By submitting the item for service you are agreeing 

to payment of the service without notification. Service 

estimates are available upon request. You must include this 

request with your item submitted for service. Non-warranty 

service estimates will be billed a minimum of ½ hour of 

labor. In addition you will be billed for return freight. Horizon 

accepts money orders and cashier’s checks, as well as 

Visa, MasterCard, American Express, and Discover cards. 

By submitting any item to Horizon for service, you are 

agreeing to Horizon’s Terms and Conditions found on our 

website http://www.horizonhobby.com/content/service-

center_render-service-center. 

ATTENTION: Horizon service is limited to Product 

compliant in the country of use and ownership. 

If received, a non-compliant Product will not be 

serviced. Further, the sender will be responsible 

for arranging return shipment of the un-serviced 

Product, through a carrier of the sender’s choice 

and  at  the  sender’s  expense.  Horizon  will  hold 

non-compliant  Product  for  a  period  of  60  days 

from notification, after which it will be discarded.

Country of  

Purchase

Horizon Hobby

Contact Information

Address

United States 

of America

Horizon Service Center

(Repairs and Repair Requests)

servicecenter.horizonhobby.com/ 

RequestForm/

4105 Fieldstone Rd  

Champaign, Illinois, 61822 

USA

Horizon Product Support

(Product Technical Assistance)

productsupport@horizonhobby.com

877-504-0233

Sales

websales@horizonhobby.com

800-338-4639

European Union

Horizon Technischer Service

service@horizonhobby.eu

Hanskampring 9 

D 22885 Barsbüttel, Germany

Sales: Horizon Hobby GmbH

+49 (0) 4121 2655 100

Summary of Contents for UMX Gee Bee




















Reviews: