background image

13

EN

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser 
that the product purchased (the “Product”) will be free from 
defects in materials and workmanship at the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) 
cosmetic damage, (ii) damage due to acts of God, accident, 
misuse, abuse, negligence, commercial use, or due to 
improper use, installation, operation or maintenance, (iii) 
modifi cation of or to any part of the Product, (iv) attempted 
service by anyone other than a Horizon Hobby authorized 
service center, (v) Product not purchased from an authorized 
Horizon dealer, (vi) Product not compliant with applicable 
technical regulations, or (vii) use that violates any applicable 
laws, rules, or regulations. 
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED 
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. THE 
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE 
DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE 
REQUIREMENTS OF THE PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive 
remedy shall be that Horizon will, at its option, either (i) 
service, or (ii) replace, any Product determined by Horizon 
to be defective. Horizon reserves the right to inspect any 
and all Product(s) involved in a warranty claim. Service or 
replacement decisions are at the sole discretion of Horizon. 
Proof of purchase is required for all warranty claims.  SERVICE 
OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS 
THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF 
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY 
WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN 
CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY 
OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
Further, in no event shall the liability of Horizon exceed the 
individual price of the Product on which liability is asserted. 
As Horizon has no control over use, setup, fi nal assembly, 
modifi cation or misuse, no liability shall be assumed nor 
accepted for any resulting damage or injury. By the act of use, 
setup or assembly, the user accepts all resulting liability. If you 
as the purchaser or user are not prepared to accept the liability 
associated with the use of the Product, purchaser is advised to 
return the Product immediately in new and unused condition to 
the place of purchase.

Law

These terms are governed by Illinois law (without regard to 
confl ict of law principals). This warranty gives you specifi c 
legal rights, and you may also have other rights which vary 
from state to state. Horizon reserves the right to change or 
modify this warranty at any time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot 
provide warranty support or service. Once assembly, setup or 
use of the Product has been started, you must contact your 
local distributor or Horizon directly. This will enable Horizon to 
better answer your questions and service you in the event that 
you may need any assistance. For questions or assistance, 

please visit our website at www.horizonhobby.com, submit a 
Product Support Inquiry, or call the toll free telephone number 
referenced in the Warranty and Service Contact Information 
section to speak with a Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is 
compliant in the country you live and use the Product in, 
please use the Horizon Online Service Request submission 
process found on our website or call Horizon to obtain a 
Return Merchandise Authorization (RMA) number. Pack the 
Product securely using a shipping carton. Please note that 
original boxes may be included, but are not designed to 
withstand the rigors of shipping without additional protection. 
Ship via a carrier that provides tracking and insurance for 
lost or damaged parcels, as Horizon is not responsible for 
merchandise until it arrives and is accepted at our facility. 
An Online Service Request is available at http://www.
horizonhobby.com/content/service-center_render-service-
center. If you do not have internet access, please contact 
Horizon Product Support to obtain a RMA number along with 
instructions for submitting your product for service. When 
calling Horizon, you will be asked to provide your complete 
name, street address, email address and phone number 
where you can be reached during business hours. When 
sending product into Horizon, please include your RMA 
number, a list of the included items, and a brief summary 
of the problem. A copy of your original sales receipt must 
be included for warranty consideration. Be sure your name, 
address, and RMA number are clearly written on the outside 
of the shipping carton.

NOTICE: Do not ship LiPo batteries to Horizon. If you 
have any issue with a LiPo battery, please contact 
the appropriate Horizon Product Support offi ce.

Warranty Requirements 

For Warranty consideration, you must include your original 
sales receipt verifying the proof-of-purchase date. Provided 
warranty conditions have been met, your Product will be 
serviced or replaced free of charge. Service or replacement 
decisions are at the sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service 
will be completed and payment will be required without 
notifi cation or estimate of the expense unless the expense 
exceeds 50% of the retail purchase cost. By submitting 
the item for service you are agreeing to payment of the 
service without notifi cation. Service estimates are available 
upon request. You must include this request with your item 
submitted for service. Non-warranty service estimates will 
be billed a minimum of ½ hour of labor. In addition you will 
be billed for return freight. Horizon accepts money orders 
and cashier’s checks, as well as Visa, MasterCard, American 
Express, and Discover cards. By submitting any item to 
Horizon for service, you are agreeing to Horizon’s Terms and 
Conditions found on our website http://www.horizonhobby.
com/content/service-center_render-service-center.

ATTENTION: Horizon service is limited to Product 
compliant in the country of use and ownership. 
If received, a non-compliant Product will not be 
serviced. Further, the sender will be responsible for 
arranging return shipment of the un-serviced Product, 
through a carrier of the sender’s choice and at the 
sender’s expense. Horizon will hold non-compliant 
Product for a period of 60 days from notifi cation, after 
which it will be discarded.

10/15

Limited Warranty

Summary of Contents for UMX MiG 15 DF

















Reviews: