5
How to Remove All Tags From Safe
Open the RAPiD
®
Safe with either the key, a previously programmed RFID tag, or key code.
Locate the red program button. Press and hold the button for five seconds to erase all
previously programmed tags. The interior light will rapidly blink.
NOTE:
The safe does not allow individual tags to be removed. They must all be erased at
one time. The intended RFID tags can then be reprogrammed with the “How to Program
Your RFID Tags” section.
NOTE:
To abort the erase procedure, do not touch anything and the erase procedure will
automatically abort after 10 seconds and return to normal operation. Test RFID tags and the
key code to confirm they are operational.
To confirm erasing procedure, press and release the program button again. The interior
light will blink three times to visually confirm all RFID tags have been removed. The RFID
tags will no longer work until they are reprogrammed according to the instructions in the
“How to Program Your RFID Tags” section.
Keypad Tones On/Off
To toggle sound on and off, press and hold the “1” button on keypad for 3 seconds until the
light turns off.
Securing Your Safe
To maintain the security of the safe, bolt the safe to a secure structure.
Record the serial number and key number in the space provided in this user manual
before securing the safe.
Bolting Down the Safe
• Open the safe and remove the foam liner from the bottom of the safe.
• Mark and pre-drill holes before installing the appropriate fasteners for your application.
• Reinstall foam liner.
Frequently Asked Questions
I’ve lost my keys. Can I get a replacement?
Contact Hornady Security
®
at 800-338-3220 and one of our technicians will assist you.
Have the safe serial number and key number found on the face of the lock available so the
correct key can be matched to your safe.
Where can I find the serial number?
The serial number is located on the bottom of the safe. Prior to mounting
the safe, record the serial number for future reference.
How long should the batteries last?
Quality batteries should last approximately 12 months, depending on use.
How do I return my RAPiD
®
Safe for warranty work?
Call Hornady
®
at 800-338-3220 and one of our technicians will assist you.
Why isn’t my RFID watchband tag, key fob, or decals opening the safe?
• Be sure the RFID tag is programmed to your safe. The RAPiD
®
Safe allows five (5) RFID
tags to be programmed for use.
• Check batteries and replace all batteries with new quality batteries.
