Cable
Lug
Loop
8
9
RAPiD
®
Safe Limited Warranty
Hornady
®
Security
™
warrants the RAPiD
®
Safe will, in normal use and service,
be free from defects in workmanship or materials for one (1) year from date
of purchase.
This Limited Warranty does not cover any of the following:
(a) Damage, deterioration, or malfunction resulting from accident,
negligence, misuse, improper installation, or lack of maintenance;
(b) Any defects not discovered and reported to Hornady
®
Security
™
during the one (1) year warranty period;
(c) Usual and customary deterioration or wear resulting from normal use.
This Limited Warranty is not transferable and is enforceable by the original
owner only. In the event that Hornady
®
Security
™
receives notice from the
original purchase of a warranty claim in conformity herewith, Hornady
®
Security
™
will promptly undertake an investigation of such claim. If the warranty
claim is covered by the Limited Warranty, Hornady
®
Security,
™
will, in its sole
discretion, repair the defect(s) or replace RAPiD
®
Safe at the expense of
Hornady
®
Security.
™
Disclaimer of Implied Warranties.
EXCEPT AS IS OTHERWISE EXPRESSLY
SET FORTH IN THE ABOVE LIMITED WARRANTY, HORNADY
®
SECURITY
™
MAKES NO OTHER REPRESENTATIONS OR WARRANTIES OF ANY KIND,
WHETHER EXPRESSED OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE
WITH RESPECT TO THE RAPiD
®
SAFE OR ANY COMPONENT PART THEREOF,
INCLUDING WITHOUT LIMITATION ANY REPRESENTATION OR WARRANTY
WITH RESPECT TO MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE OR USE.
Limitation on Liability.
THE OBLIGATION OF HORNADY
®
SECURITY
™
TO REPAIR
OR REPLACE AS PROVIDED ABOVE SHALL BE THE SOLE AND ONLY REMEDY
RESPECTING ANY DEFECT IN THE RAPiD
®
SAFE, OR ANY COMPONENT
PART THEREOF. IN THE EVENT THAT THE FOREGOING REMEDY FAILS OF
ITS ESSENTIAL PURPOSE, THE LIABILITY OF HORNADY
®
SECURITY
™
TO
PURCHASER SHALL NOT, IN ANY EVENT, EXCEED THE ACTUAL PURCHASE
PRICE OF THE NON-CONFORMING GOODS; AND
Limitation on the Nature of Damages.
HORNADY
®
SECURITY
™
SHALL NOT,
UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE PURCHASER OR ANY
THIRD PARTY FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL,
LIQUIDATED OR PUNITIVE DAMAGES OF ANY NAME, NATURE OR
DESCRIPTION. HORNADY
®
SECURITY
™
IS NOT RESPONSIBLE FOR DAMAGE TO
OR THEFT OF THE RAPiD
®
SAFE, OR ITS CONTENTS.
How to remove all tags from safe:
1. Open the RAPiD
®
Safe with either the key or a previously programmed RFID tag
or key code. Locate the red program button. Press and hold the button for five
seconds to erase all tags from the safe. All five red LEDs will begin to blink in
sequence. (The safe does not allow individual tags to be removed. They must all
be erased at one time. The intended RFID tags can then be reprogrammed back
into the safe with the instructions above.)
NOTE:
To abort the erase procedure, press the “H” button on the lid of the safe
or do not touch anything and the erase procedure will automatically abort after
10 seconds and return to normal operation.
Test RFID tags and the key code to
confirm they are operational.
2. To confirm erasing procedure, press and release the program button again.
All five LEDs will blink three times to visually confirm all RFID tags have been
removed. All RFID tags will no longer work until they are programmed back into
the safe with the instructions in the “How to Program Your RFID Tags” section.
Closing the Safe
The safe has a latch closure sensor that will illuminate the LED in the keypad
when the lid is closed.
Green – Latch has fully closed.
Blinking Red – Latch has NOT fully closed.
Press lid down to fully close or re-open and check for interference.
Security Cable
The RAPiD
®
Safe includes a security cable that can be looped around a
stationary object. With the safe lid open, feed the lug end through the loop end
and place the lug end of the cable into the security cable slot and close the lid.
