8
Closing the Ready Vault
The vault has a latch closure sensor that will illuminate the LED in the keypad when the
door is closed.
Green – Latch has fully closed.
Blinking Red – Latch has NOT fully closed.
To close the vault, hold the door closed while rotating the handle on the front to the
vertical position. Verify green light appears on the keypad.
Installing Gun Racks
on Peg Wall Panels
The metal interior peg wall panels and
included patent pending gun racks are
designed to maximize space and organize
your safe. The dual-purpose gun racks
accommodate up to 8 long guns and 14
handguns by utilizing otherwise empty
space between barrels.
To install gun racks:
Place top hooks into the holes in the peg
wall panel, rotate the gun rack down so
the bottom hooks also enter a peg hole,
and then slide the gun rack down to lock
into place.
To remove gun racks:
Lift the gun rack vertically, rotate the
bottom hooks out of the holes in the peg
wall panels, and then slide top hooks out.
The peg wall panels are compatible with
the Hornady Security Dehumidifiers, LED
Lights, Hygrometer, and other accessories
(sold separately).
Installing Gun Rack
