STEP
1.
O
pen Safe With Override Key
1.
Insert
and rotate override key to unlock.
2.
Turn
knob
to
left
and
open
the
safe
door.
3.
Do
not
store keys in safe.
STEP
2.
I
nstall
B
atteries
1.
Remove
the
battery
cover inside the door
by removing screw.
2.
Insert
4
AA
batteries
and replace the
battery
cover.
3.
Do not close the door before testing digital
lock.
STEP
3.
P
rogram F
ir
st Passcode
1.
Open safe door with override key.
2.
Press the red reset button(C) inside the door. The safe will beep twice and the
yellow light on the keypad will t
ur
n on.
3.
Enter new
passcode (3 t
o 8 digits) within 10 seconds followed by "A".
The safe will beep twice and the yellow light will turn off. With the door open,
verify the correct code is programmed by enter
ing
code followed by "A". The
motor should activate when the correct code is entered. If not, repeat steps
above.
4.
1.
Keep door open.
2.
Press "0" on the keypad twice, then press
the red reset button (C) inside the door.
The safe will beep 3 times and the yellow
light turns on.
4.
The safe will beep twice and the yellow
light will turn off. With the door open,
verify
the correct code is programmed by
enter
ing
code followed by "B". The motor
should
activate when the correct code is
entered.
If not, repeat steps above.
STEP
4
. Program Second Passcode
3
.
Enter new passcode (3 to 8 digits) within
10 seconds followed by "B".
SETUP
