10
BACKUP MECHANICAL KEY OVERRIDE
WARNING: Store keys in a secure location away from the safe.
To access key override slot, gently slide digital keypad up and away from door
to remove keypad.
NOTE:
When digital keypad is removed, handle keypad and cable carefully to
prevent damage to cable.
UNLOCK
Place key into slot as shown and rotate clockwise. With key rotated, rotate door
handle clockwise to retract locking lugs and open door.
LOCK
Fully close door. Then rotate door handle counterclockwise to extend locking
lugs. Rotate key counterclockwise to lock extended lugs and safe. Remove key
and carefully tuck cable back into hole in door while replacing digital keypad.
Make sure safe is locked.
BOLTING DOWN YOUR VAULT
We recommend bolting your vault to the floor using two ¼" wedge anchor
concrete bolts through the predrilled holes in the BOTTOM of the vault.
